How to replace keurig 2.0 water filter?

How to replace keurig 2.0 water filter
How to replace keurig 2.0 water filter

Does the Keurig 2.0 need a water filter?

The keurig water filter is a highly porous carbon material. A large number of microcells causes the presence of an extensive active surface, each section of which is capable of fixing foreign particles. The basis of keurig water filter is carbon concentrate of different origin.

In practice , coals from the following types of raw materials are used:

  • wood,
  • peat;
  • coconut and fruit shells,
  • fruit seeds;
  • coal.

Sorbents are obtained by carbonation, followed by activation. Most often, carbon concentrates are activated by water vapor.

Depending on the temperature, the hot moisture supply mode, and other agents that increase the absorption capacity, the material acquires different porosity.

After the activation is completed, the carbon product is crushed.

Some sorption filters contain aluminum silicates, zeolites, and their derivatives as absorbers. Such porous materials effectively purify water, but they do not belong to coals.

Where is the water filter on Keurig 2.0 K200?

The purpose of the water filters is to purify filtered water, firstly, from large particles (sand, rust, hair). Secondly, from the chemistry called chlorine, as well as from magnesium and calcium, the list can be continued indefinitely.

Calcium has a very detrimental effect on heating elements. At temperatures above 60 ° C, metals begin to turn into an insoluble precipitate. All these formations further complicate the passage of fresh water.

A clogged thermoblock with calcium inevitably leads to the repair of a coffee machine in our company.

The presence of impurities is easy to detect by a simple method. Pour a little water into the pan, bring to a boil. If a white plaque forms on the walls, you have a direct road to the store for a new filter and not only for the coffee machine.

The second solution is to filter hard water in the house.

How to replace keurig 2.0 water filter

If you use bottled water or you have a good built-in filter, then you have nothing to worry about.

We strongly recommend using quality filtered water. Everyone determines the level of quality for himself, especially the size of his wallet.

As a rule, most of the best manufacturers use coconut shell chips as a water filters, as an environmentally friendly and effective material and activated carbon, and ion exchange resin as a water softener.

In appearance, ion–exchange resin is a cluster of small balls (up to 1 mm in diameter), which are produced from polymer materials.

Anyone who has never encountered this material can easily confuse resin with fish roe.

There are also options for using polymer materials and compressed wood corner as a filters.

How do I change my Keurig water filters?

Purchase a new kit of Keurig filters. Keurig water filter is not sold separately, so you will need to buy a kit. They are usually sold in groups of 6 or 12 pieces. Keurig water filters are sold in the same stores where Keurig devices are sold.

Check out all businesses or department stores that sell household items, including Bed Bath and Beyond, Sears, Target, and larger grocery stores.

If you prefer to shop online, Keurig water filters are sold through major retailers such as Walmart. Also check the websites of companies that sell household items.

Water filter kits are relatively inexpensive. Depending on the number of individual keurig 2.0 water filter in the package, their cost can vary from 5 to 10 dollars.

How to replace keurig 2.0 water filter


Soak the filter in water for 5-10 minutes. Before you install a new filter in your Keurig and prepare your first cup of coffee, the keurig filter must be soaked and absorb water.


Fill a cup or bowl half full of water and lower the filter into it. Make sure the keurig filter is completely submerged in water during soaking.


At first, the new filter will float, but after 10 minutes it will absorb water and sink to the bottom of the cup or bowl.Rinse the filter.


For best results, rinse the new filter with tap water after soaking it. Keep tap water running at medium speed and flush the keurig machine for a full 60 seconds.


Wash the bottom water reservoir holder. The bottom water filter cartridge holder will have a thin mesh layer on the underside. Rinse it with tap water to remove dirt or dirt that may have formed during normal use.


Also, quickly rinse the sides of the lower water reservoir holder.


Replace the keurig machines in the filter housing. Insert the new water reservoir into the filter holder with the rounded top side up. Install the lower water filter cartridge holder in place under it.


The mesh bottom of the lower water reservoir holder should cover the flat bottom of the fabric filter. Snap the 2 sides of the filter holder in place around the water reservoir.


Turn the replacement disc forward for 2 months. The replacement disc is located in the upper part of the handle of the keurig machines replacement unit. It is about the size of your thumb and contains the numbers 1-12 (each of which corresponds to the corresponding month).


Turn the dial clockwise until the indicator points to the month 2 earlier than the current month.


So, if it’s October (the 10th month), set the replacement disk to 12 (December).

How to replace keurig 2.0 water filter

Keurig coffee machine will use this setting to trigger an electronic reminder after 2 months.

However, you need to set up the reminder manually.

Become a Keurig coffee machine in such a way that it reminds you of the next lower filter holder change. Your Keurig coffee machine has a setting that allows you to warn you about the need to replace the lower filter holder every 2 months.

If you have correctly moved the replacement disk 2 months ahead, you can enable the reminder via the electronic menu.

Go to the “Settings” section and select “New Filter Reminder”. Select “Enable”.

Depending on the specific model and generation of your Keurig machine, its menu may vary slightly.

Older models (before Keurig 2.0) may not have an electronic reminder function.

Insert the water filter unit into the Keurig tank. After you have reassembled the charcoal water filter, insert it back into the Keurig water filter.

The outer side of the lower filter holder will snap if it is pressed tightly against the bottom of the tank.

If the filter does not snap, make sure that you have properly aligned the grooves on the bottom of the bottom keurig filters holder with the plastic protrusion at the bottom of the Keurig water reservoir.

How do you remove the water filter from a Keurig reservoir?

Remove the top of the Keurig water reservoir. In most change Keurig water filter change, the filter cartridge is located on the left side of the machine. By completely removing the tank cover, you will have access to the water filters.

You can replace the charcoal water filter if there is new keurig water filter reminder in the tank or if the tank is empty.

Remove the filter block. Part of the handle of the upper filter holder will stick out of the water tank. Grasp the handle firmly and pull it out of the keurig model .

The lower part of the water filters holder will be fixed in plastic slots at the bottom of the plastic grooves. You may need to pump the water filter unit holder in place or pull it sharply to remove it.

If you have a Keurig’s water reservoir, your filter will be black with a round timer at the end. If you have a K200 Plus, the filter will be transparent and short, while in the K300 and higher models, the filters are high, thin and transparent.

Open the filter holder and discard the used filter. With your thumb and forefinger, pinch the protrusions at the bottom of the most keurig models unit. Pull down to release the bottom filter holder, then pull out the old bottom of the filter.

The old filter can be thrown in the trash in the kitchen.


Keurig coffee makers make best tasting coffee with the help small charcoal filter. You need change keurig water filter in accordance with the instructions and standards of use. Tasting coffee it is obtained due to the special structure of the filter. In this matter, it is very important that it is distilled water. In the future, the taste will depend on it.

Due to the medium flow of energy , the water flow goes at an optimal speed, allowing the water to filter out well

If this guide was useful – share with you friends and write comments.

Leave a Comment